How to Choose Silver, Platinum, Or White Gold Jewellery
Add elegance and versatility to any ensemble with adjustable sterling silver rings, from everyday wear to formal events. Their adjustable designs offer versatile designs perfect for daily wear or special events.
Platinum is an entirely natural white metal that's hypoallergenic. Its hardiness allows it to resist bending or denting and has an attractive soft patina over time. White gold, in comparison, is created by mixing yellow gold with other white metals such as rhodium for an eye-catching luster finish.
How to Measure Your Ring Size at Home
Your ring size has a dramatic effect on comfort and fit when selecting new jewelry pieces, so it is essential that it be measured accurately. Most jewelers recommend consulting a printable ring size chart featuring actual rings with various sizes as a guide, but you could also try the following method at home: cut a thin strip of string and wrap it around the base of your finger just below where you would wear the ring; mark where the strip overlaps before measuring its length in millimeters using a ruler before comparing that measurement against an American ring size chart to find your ideal ring size!
Silver and gold are both soft metals, susceptible to nicks and scratches. Both can be strengthened through alloying with other hardening metals; however, this decreases their durability. Sterling silver made of pure silver mixed with copper is more resilient than its gold counterpart but not nearly as strong as platinum.
White gold jewellery is typically covered in rhodium plating to achieve its bright white colour, and this coating may wear off over time; therefore, regular touchups will need to be done. Unfortunately, some manufactures of white gold appear slightly yellowish as compared to platinum which achieves the pure white colour more effectively.
As cold weather causes blood vessels to constrict, your fingers may shrink by half-sized in response. For the best results, take two measurements at different intervals so as to achieve consistency; or visit a jeweler for professional measurements using their specialist tools to accurately ascertain your ring size and help you choose your ideal piece.
Indian Ring Size Chart
Men often guess their ring sizes incorrectly and end up with rings that jam at their knuckle or slide off completely, leading them into an exhausting return process that wastes both their time and money. To prevent this mistake from occurring again, utilize an effective way of measuring your size at home - the most accurate being ordering a metallic finger sizer so you can test on before purchasing and compare with an international sizing chart like in India or US for instance. This tool helps confirm precisely your ring size before purchasing and compare it against international sizing charts such as US/ India etc for accurate comparison purposes!
Use string, thread, or dental floss to measure your finger ring size. Simply wrap the strip snugly around your base finger and mark any overlaps with a pen before laying flat against a ruler and measuring in millimetres; once completed you can refer back to our sizing chart to determine your Indian ring size.
Drippin' Gear rings are listed in Indian sizes. Each product page also provides a handy sizing guide that specifies whether or not an style requires going up one size; wider bands require going up by one. If you have any inquiries about our sizing guidelines or have any other inquiries before placing an order with Drippin' Gear directly - our friendly customer service representatives will answer all questions quickly while helping select an ideal ring size that provides long-term comfort!
Adjustable 925 Silver Rings
No matter your style preference - minimalist or bold - adjustable rings make an excellent addition. Their adaptable nature means they adapt naturally as your finger size changes while providing comfort for everyday wear, plus their diverse collection of designs can enhance every outfit!
Silver is an inexpensive precious metal with multiple applications and uses. From making bold sculptural forms and intricate designs to being oxidised for an eye-catching dark patina finish. However, to keep its shine in pristine condition it's best to limit direct contact with certain chemicals like perfume, hairspray and soaps containing sulphur; additionally it should be taken off prior to swimming or participating in physical activities which cause sweating as these will hasten its tarnishing process.
Silver's beauty lies in its versatility: It can be mixed with other metals to strengthen and increase durability without losing its precious hue. Sterling silver, which contains 92.5 percent pure silver mixed with 7.5 percent other metals (usually copper) is widely used today as the material for modern rings; due to its strength, daily wearers may prefer this budget-friendly alternative over gold rings.
White gold begins as yellow metal and then needs to be alloyed with other metals in order to turn white, while platinum begins out naturally white and does not need alloyed to achieve its color. Because of this, platinum is stronger and more durable than its peers - although regular polishing may still be necessary in order to preserve its luster and the cost is slightly more than silver or white gold due to being sold by weight.
7-Day Return Policy
When selecting precious metals, many decisions must be made. Each metal represents different characteristics - durability, rarity and price are among them - but ultimately most people decide based on color preference alone; silver, white gold and platinum all look similar but have distinct properties which make each special.
Silver is an extremely soft metal that is susceptible to nicks and scratches. To combat this problem, silver is usually mixed with other metals like copper or zinc in order to make it stronger; even so, it remains much softer than platinum and white gold.
As such, jewellery must be coated in rhodium for its characteristically bright white hue; however, over time this plating wears off and should be reapplied every year in order to maintain its shine and brightness.
Platinum, on the other hand, is an naturally white metal so there is no need for plating with any other metals like rhodium or other precious materials. While gold has an orange tone to its hue, platinum's pure and bright white hue make it an appealing option when shopping for wedding bands or engagement rings with an elegant and classic aesthetic.
Due to its higher noble metal percentage, platinum costs 2.5-5 times more than white gold in terms of production costs and is more difficult to work with than either silver or gold, further increasing production expenses. On the plus side, however, platinum will last longer and requires less upkeep such as regular polishing and replatting.
Reduce Sizing Concerns
If you want a piece of high-quality jewellery, it is essential to consider the durability of its precious metal. A precious metal's density affects how it responds to pressure, impact and scratches; platinum stands out among them as having the densest density, making it less susceptible to wear than white gold and silver, which tend to lose their thickness more quickly.
Silver can tarnish quickly and must be polished and replated at least every year to maintain its shine. Furthermore, this soft metal is more susceptible to scratching and wear-and-tear than platinum; wearing your ring regularly could damage its design and cause visible lines on your finger.
White gold is made by mixing pure gold with other white metals to form its colour. Depending on its mixture and manufacturing process, its hue could range from light yellow or grey. Rhodium plating finishes off this shiny material for a modern appearance.
Some manufacturers use lower quality alloys in their white gold manufacturing, which may result in its appearance becoming slightly yellowed over time. Although this is not usually a major issue, it could affect its overall look and could potentially affect how you view your ring.
Alloying also plays a vital role in the durability of rings. Pure 24k gold or 99% pure silver can be very soft, bending easily when bent and scratching easily; to strengthen them further they are often mixed with hardeners like nickel, zinc, or copper to harden them and make the ring more resistant against wear-and-tear, although still not as durable as platinum; over time the band may thin and require frequent resizings.
